Home > News > Content

What Does The Cosmetic Bottle Material Contain(1)

Apr 01, 2018

1. Plastic bottle

1. The material of plastic bottles is usually PP, PE, K, AS, ABS, acrylic, PET, etc.

2. The cream bottles, bottle caps, corks, gaskets, pump heads and dust shields used in the thick wall of cosmetic containers are molded by injection molding. PET blowing bottle is two step forming, tube embryo is injection molding, the finished product packaging is blowing bottle. Other bottles, such as the thinner side of the container, wash the bottle to blow the bottle.

3, PET material for environmental protection, high barrier property, qualitative light, no broken properties, chemical resistance, transparency is extremely strong, can make magnetic bead light, color, white, transparent, widely used in hold gels water. The bottle mouth is generally standard 16#, 18#, 22#, 24#, and can be used with pump head.

4, acrylic material for plastic bottle, chemical resistance is poorer, generally cannot directly paste, need to match the tank, filling not too full, prevent the paste into the bladder and acrylic bottle, lest produce cracks, transport packaging of the demand is higher, because of the cut after look particularly evident, high permeability, sensory on wall thickness, but the price is quite expensive.

5. AS, ABS: AS transparency is better than ABS, and the toughness is better.

6, mold development costs: bottle blowing mold for 1500 yuan, 8000 yuan, injection mold for 8000 yuan, 25000 yuan, the mould with stainless steel material more expensive than alloy material, but durable, die a few at a time, see the demand of production, such as production is bigger, can choose one out of four or six of the mould, the client may decide.

7, 3000-10000 order is commonly, can decide the color, usually do primary grinding and magnetic white is given priority to, or effect of pearl powder, bottle and cover with the same quality of the mother, but sometimes due to the bottle and cover with the material of different, show some of the color difference.

8. Screen printing has ordinary ink and UV ink, UV ink effect is better, luster and three-dimensional sense, in the production of the first version to confirm the color, in different materials of the screen printing effect will be different.

9, bronzing, hot silver, such as processing and printing gold powder, silver powder effect on distinguishing, hard material and smooth surface is suitable to bronzing, hot silver, soft surface decoration effect is not good, easy to fall off, hot stamping silver gloss printing golden silver.

10. The screen printing film should be negative, the text effect is black color, the background color is transparent, the gold is hot, the silver process should be made of the positive film, the text effect is transparent, the background color is black. The proportion of text and design should not be too small or too small, otherwise the effect will not be printed.

11. The bottle cap is usually equipped with inner gasket, lacing, inner plug, and a few small ladle or dropper, which is mainly considering the convenience of sealing and use.

12, the production cycle is relatively modest, which is about 30 days cycle, screen printing cylindrical bottle 1-color design calculation, flat or special-shaped bottles according to double color or multicolor calculation, usually charge for screen printing screen fee or jig fee for the first time, screen printing unit price is 0.08 yuan/color to 0.1 yuan/color, screen 100 yuan - 200 yuan /, about 50 yuan/a fixture.

Ii. Glass bottle

1. Glass bottles are mainly used for cosmetics: skin care products (cream, lotion), perfume, essential oil and nail polish are of small size, and more than 200ml is rarely used in cosmetics.

2. The glass bottles are divided into wide mouth bottles and narrow mouth bottles, and the solid paste is generally used in jars. It is suitable to use aluminum caps or plastic covers, and the caps can be used for color spraying. Emulsion or water-based paste narrow mouth bottle, is commonly used in appropriate with the pump head, attention should be paid to prevent spring and ball rust, now most of the pump head with glass beads, ingredients usually take test for test, such as stuffed with LIDS, with holes in the plug, water emulsion is thicker with big hole plug.

3, glass material is relatively consistent, modelling is more, the processing technology, rich and diversification cap collocation, common bottle shape is cylindrical, elliptic, flat look, prismatic, conical, manufacturers often develop series of bottle shape. The bottle body process has spray, transparent, frosted, translucent toning, silk printing, gold, hot silver, etc.

4, screen printing, glass screen printing usually has two kinds, one kind is high temperature ink screen printing, its characteristic is not easy discoloration, colour and lustre is heavy dumb, it is difficult for purple color mixing effect, the other is a low-temperature printing ink printing, colour and lustre is colourful, higher requirements for printing ink, otherwise easy to fall off, and should pay attention to in the bottle disinfection.

5, the effect of spraying generally want to plus 0.5 yuan, 1.1 yuan/a, depending on the area and toning difficulty, screen printing is 0.1 yuan/color, cylindrical bottle can be monochrome, special-shaped bottle according to double color or multicolor calculation, bronzing hot silver 0.4 yuan/money.

6, glass bottles, such as belong to the manual mold production, capacity will appear a little deviation, when selecting test should be done and the capacity of the labeled correctly, such as automatic production line is relatively uniform, but shipments require large, relatively long cycle, capacity is relatively stable.

7, glass thickness will be easy to cause damage, or in cold conditions are easily break contents should be filled in the test capacity, reasonable application paper hug and single separated on transportation, on the product should be equipped with color box, and inside of the box can take to prevent vibration.

8. The commonly used bottle shapes of glass bottles are usually in stock, such as refined oil bottles, ordinary transparent or frosted bottles. Glass bottle production cycle is long, fast requires 20 days, some coordination &liaision instead to 45 days, and the general order for 5000 to 10000, the smaller the bottle to do the quantity, the greater the cycle and the minimum quantity will be affected by the peak season and off-season.

9. Opening mould cost: the manual mold is around 2500 yuan, and the automatic mold is usually around 4000 yuan, and 1 out of 4 or 1 out of 8 is about 16000 yuan - 32,000 yuan, depending on the manufacturer's condition.

10. The process of bottle cap can be used to electrochemical aluminum engraving, gilding edge, etching line, and the color of matte bright color, with gasket and inner cover, it is better to cooperate with pressure sensitive film to enhance sealing effect.

11. The oil bottle is usually made of tea or colored and colored sand, which can avoid light. The cover is covered with insurance ring, and can be equipped with internal plug or dropper. The perfume bottle is usually equipped with a delicate spray pump head or plastic cover.

Three, hose

1. The hoses are divided into single layer, double layer and five-layer hose, which are different in the aspects of pressure protection, penetration and feel. For example, the five-layer pipe is composed of outer layer, inner layer and two bonding layer, and the barrier layer is different. Features: excellent gas barrier properties, effective in preventing the infiltration of oxygen and odor gases, while preventing the contents from the aroma and the effective components exudation.

2, double tube is relatively common, belongs to the medium can also be single, hose diameter 60 # # 13 - a variety of caliber, elected a certain diameter of the hose, the capacity of different characteristics in different length, capacity of 3 ml - 360 ml can be adjustable, in order to beautiful and coordination, the calibre of the commonly used below 35 # below 60 ml, 100 ml, 150 ml usually use 35 #, 45 # caliber, more than 150 ml capacity is more than 45 #.

3. The process is divided into circular tube, oval tube, flat tube and super flat tube. The flat tube and super flat tube are more complicated than other pipes, which is also the new type of pipe in recent years, so the price is more expensive.

4, hose cover shape diversity, generally can be divided into flat head cover, round epicranium, high cover, lift the lid, super flat cover, double cover, the spherical cap, lip gloss cover, plastic cover can also be a variety of craft processing, bronzing, silver, non-ferrous, transparent, fuel injection, electroplating, etc., pointed mouth cover and lipstick cover are usually equipped with a plug in. The hose cover is the injection molding, the hose is the pull pipe, most of the hose manufacturer does not produce the hose cover themselves.

After 5, some products need to filling and sealing, and sealing to is divided into: straight grain and sealing, twill and sealing, umbrella sealing, star sealing, sealing, sealing can ask in sealing in code to print out the required date.

6, hose can do color tube, transparent tube, color or transparent frosted, bead light pipe, and a dumb light with the light and elegant matte seemingly but easy dirty, colored tube and pipe shaft large difference of printing, but judging from the tail slit, slit for white tube for large area printing, use the ink demand is high, otherwise easy peeling and cracking after folding and white mark.

7, hose production cycle is 15 days - 20 days commonly cycle (starting from the confirmation here) order item for 5000-10000, the size of the factory in 10000, for minimum quantity, usually if a few small manufacturer variety, item 3000 minimum quantity to also can, there are few customers to open mold, mostly male die (a few characteristics of the lid is the private mold) contract order quantity and actual quantity supplied, the industry of the deviation of plus or minus 10%.

8, hose quality and there are many differences between manufacturers, there are different price, plate-making fee usually in color 200 yuan - 300 yuan, the price of play can be multi-color printing and screen printing, individual manufacturer with thermal transfer equipment and technologies. Bronzing and ironing are calculated by the unit price. The printing effect is better, the cost is more expensive and the factory is less, and different manufacturers should be selected according to different levels of demand.