Home > Knowledge > Content

Packing Bottles

Oct 15, 2015

Vacuum bottles: cover, shoulder, vacuum pump, piston. Rely on air pressure. The mix of nozzle, the chicken mouth tip (full plastic and is in outside the layer of anodized aluminum), flat head of the duckbill in bread a layer of plastic.  

Lotion bottle: by the lid, the shoulder sleeve, the emulsion pump, the piston. More than for internal hose. 

How is in acrylic, PP material. The lid is acrylic ABS.

Perfume bottle, glass external aluminum (according to a covering of the rotation and non rotation two) 

2, PP bottle (injection PP) 3, glass type drip irrigation 4, perfume bottle liner is a type of glass and PP of internal components. Large capacity to use glass, because the storage time is longer, PP is suitable for short-term storage of small capacity. PCTA and PETG most is no perfume.  

Cream bottle: the outer cover, an inner cover, an outer bottle liner.  

1 external acrylic, internal PP material. The lid is outside the ABS to add a layer of acrylic PP gasket

2 ceramics, PP anodized aluminum, anodized aluminum cover PP, ABS

There is a layer of PP gaskets.  

3 PP bottle, inside with a layer of PP. 4 external ABS internal PP. There is a layer of PP gaskets. 

Blow molding bottle: material PET material. The lid cover, flip and spin points will cover three. Blow 

molding is a bottle of embryo directly blown. Feature is the bottom of the bottle has a bump. The light is bright.  

Blow bottle: material is PP or PE. The lid cover, flip and spin points will cover three. The bottle is 

blowing and blowing process of injection and blow Become, only need a mold. Feature is the bottom of the bottle has a line.  

Laminated tube:  PE material is the most inside is outside pack. And offset. Cut and then roll. 

According to the tube head of a round tube, flat tube, oval tube. Price: < < flat tube elliptical tube 

tube

Fully plastic tube: all PE material, and the first out of the hose to cut off after the offset printing, 

screen printing, hot stamping. According to the tube head of a round tube, flat tube, oval tube.